LED IP65 Waterproof Microwave Induction Lamp Made in China - Factory Price

Product Description

Microwave Sensor Light Instruction

LED IP65 Waterproof Microwave Induction Lamp

PD-LED2046GS IP 65

LED IP65 Waterproof Microwave Induction Lamp

Use high quality PC lampshade.Strengthen the flexible refraction of light.And its function of anti-ultraviolet makes the shade not easy to turn yellow and be broken.

Product size

LED IP65 Waterproof Microwave Induction Lamp

100-250V~

72 x LED(2835), 18W

Ø339 x 108 mm

About the “ L’ ” :
LED IP65 Waterproof Microwave Induction Lamp have synchronization function ,
also can call them "master and servant" function.
"Master" is with sensor's lamp ,"Servant" is without sensor's lamp"
When the "Master" lamp turn on ,the "Servant" will follow turn on .
When the "Master" lamp turn off ,the "Servant" will follow turn off .

If you need this function ,connecting method is that :
N is for master and servant(N parallel), L is for master ,L'is for servant .
LED IP65 Waterproof Microwave Induction Lamp

LED IP65 Waterproof Microwave Induction Lamp

Summary

This is a microwave sensor switches controlled LED IP65 Waterproof Microwave Induction Lamp,the microwave sensor was built into the light ,it has 72pcs high brightness LEDs inside ,with total power of 18 watts. When light on, the luminous flux will be more than 1050 lm, 60 watt incandescent lamp(≈400lm) and the life exceeds 50,000 hours. We adopt this sensitive advanced sensor switchs in lighting control, enabling the light to turn on automatically when one comes , automatically turn off when one goes out In addition to the widely usage in the aisle stairs ,living room and bedrooms , it also can be installed in the bathroom

Specification of LED IP65 Waterproof Microwave Induction Lamp

Power source: 100-250V/AC	Detection angle: 360°
Power frequency: 50/60Hz	Standby power: <0.5W
Rated load: 18W Max.	Installation height: 2.5-4.5m
HF system: 5.8GHz CW electric wave,	(ceiling mount)
ISM wave band	Luminous flux: 1050lm
Transmission power: <0.2mW	Working temperature: -10°C~+55°C
Time setting: 8sec to 12min (adjustable)	LED quanlity: 72PCS
Detection range: 1-8m (radii.)(adjustable)	LED specifications: 2835
Light-control: 10-1000LUX(adjustable)

LED IP65 Waterproof Microwave Induction Lamp

Fault and the solution

Fault	Failure cause	Solution
The load fails to work.	Light-illumination is set incorrectly.	Adjust the setting of the load.
	The load is broken.	Change the load.
	The power is off.	Turn the power on.
The load works all the time.	There is a continuous signal in the region of the detection.	Check the settings of the detection area.
The load works when there is no motion signal detected.	The lamp isn't installed well so that sensor fails to detect reliable signals.	Re-adjust the installation place.
The load works when there is no motion signal detected.	Moving signal is detected by the sensor (movement behind the wall, the movement of small objects, etc.)	Check the settings of the detection area.
The load fails to work when there is motion signal detected.	The motion speed is too fast or the defined detection area is too small.	Check the settings of the detection area.

LED IP65 Waterproof Microwave Induction Lamp

1.The LEDS in serial can function when all the seals installed in place.
2.Please don’t remove or connect with other lamp when powered on.
3.When the LEDS in serial are damaged ,you need experienced technician to repair using the same rating LEDS.

●Please confirm with profession installation.
●Please cut off power supply before installation and removal operations.
●Make sure that you have cut off the power for safety purposes.
●Improper operation caused losses, the manufacturer does not undertake any responsibility.