Automatic Photocell Light Switch

Light Control Sensor PD-P09 instruction

Summary

The light-control switch can turn on and turn off light automatically according to ambient light; it is not affected by ambient temperature and humidity; It is not only convenient but also practical; it can control the load that works at night.

Specifications

Power Source: 220-240VAC
Power frequently: 50Hz
Rated Current: 6A(pure resistance load)
Light-control: Load on＜10LUX 
 Load off＞30LUX

Test
1.Use opaque to cover the sense-light window when testing in the daytime.
2.When cover this opaque, the load will be on . 
3.When take off this opaque, the load will be off. 
4.Take off this opaque after testing. 

Notice
1.In front of the light-control switch there should be no block affecting it to receive natural light;
2.In front of the light-control switch there should be no swaying object;
3.Avoid installing the unit below light.

Connection-wire diagram
Connect blue and brown with power
Connect blue and red with load

Installation